Honda’s Cruise Control Hydrostatic Transmission: Making Mower Control Easy


Hydrostatic motors are used in most riding mowers, but walk-behind models have been stuck with clunky geared transmissions. Honda is changing that with their Cruise Control Hydrostatic Transmission. This exclusive feature makes mower speed fully adjustable for better control on hills and around obstacles, and it works with other mower features to make stops and starts easier.

Why Use a Hydrostatic Transmission?

When you want to change your speed when driving a car, you can shift gears or use more or less throttle. You can also do the same thing on a mower, but there’s a problem: if you close the throttle, the engine won’t spin the blade as fast, reducing cutting performance. Instead of setting the speed exactly where you want it, you have to shift the transmission into gear and work around whatever speed it’s going. This makes mowing awkward when going over slopes, as the mower ends up going too slow or too fast. The gears are also too high for slow speed maneuvers, forcing the operator to shut off the drive system and push the mower when operating in narrow spaces and around landscape features.

Hydrostatic transmissions commonly found on riding mowers and wide-area walk-behind mowers get around this by using a hydraulic pump to control drive speed. By changing the amount of fluid pumped by the hydraulic system, the speed can be varied independently of the throttle. The Cruise Control transmission works the same way, but it’s small enough to be used in a regular walk-behind mower.

How Does it Work?

Instead of driving gears, the engine drives a hydraulic pump. This pump has a set of pistons connected to a swash plate. By changing the angle of this plate, the distance the pistons travel changes, increasing or decreasing the amount of fluid they pump. That fluid is used to drive a hydraulic motor connected to the wheels. In effect, it’s like having a second throttle independent of the engine.

With the pump running at its full flow rate, the pump in the Cruise Control transmission can drive the hydraulic motor fast enough to reach a speed of 4 mph. That’s a brisk walking pace.

Less Complicated Than It Sounds

Hydrostatic drive systems in riding mowers often use a combination of pumps, hoses, filters, and motors to drive the vehicle. However, Honda was able to design a complete hydrostatic drive system including the pump and motor into a single unit that’s no larger than a geared walk-behind mower transmission.

This drive unit is sealed, so it requires no maintenance. There’s also no clutch to wear out, nor is there a belt connected to the engine that can slip and break. That means these mowers require less maintenance and have fewer points of failure than a walk-behind with a geared transmission.

Using Hydrostatic Cruise Control

The bail on the top of the handle changes the swash plate angle, increasing speed as it’s closed. The cruise control lever below it limits plate movement, offering 9 settings for maximum speed. Usually, the bail will be fully engaged, so the mower speed will be the maximum set by the cruise control. The lower the cruise control setting is, the finer the speed adjustment is using the bail. This gives the mower precision control when operating in areas filled with obstacles without being erratic at high speeds.

All models that have a hydrostatic transmission also come with the Roto-Stop blade stop system. This uses a clutch between the blade to the engine shaft, stopping the blade when the operator leaves the controls. With both the blade and bail disengaged, the engine can keep running without cutting or rolling away. When you return to the mower, you don’t need to restart the engine, and you can squeeze the bail to return to your original mowing speed as set, using the cruise control lever.

Which Models have a Cruise Control Hydrostatic Transmission?

Currently, Honda fits this transmission to the HRX217HYA, HRX17HZA, and HRC216HXA.

When You Think “Honda,” Think “Honda Lawn Parts”

Honda Lawn Parts is an authorized Honda Engines and Honda Power Equipment dealer so we can supply you with what you need for your mower, generator, snowblower, pump, trimmer or engine. Our site has factory information built-in including parts diagrams and descriptions, making it easy to find exactly what you need. Whether you’re in the US or Canada, you have parts shipped to your door by visiting

What is Honda’s Cruise Control Hydrostatic Transmission?

hondahydrostaticHydrostatic transmissions have long been favored in professional lawn equipment, but now Honda is bringing them to their HRX217HYA, HRX17HZA and HRC216HXA walk behind mowers. The Cruise Control Hydrostatic Transmission doesn’t need belts or chains to transfer power, and it makes setting and keeping a mowing speed easier than any self-propelled mower on the market.

Continue reading